Isuzu 5-speed: Difference between revisions
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
'''Isuzu 5-speed''' refers to the five-speed manual | '''Isuzu 5-speed''' refers to the five-speed manual transaxle used in four-cylinder [[Pontiac Fiero]] models. | ||
The Isuzu 5-speed was the factory five-speed manual transmission used with the 2.5L four-cylinder Fiero. It should not be confused with the [[Getrag 5-speed]], which was used with the 2.8L V6. | The Isuzu 5-speed was the factory five-speed manual transmission used with the [[Iron Duke|2.5L four-cylinder]] Fiero. It should not be confused with the [[Getrag 5-speed]], which was used with the [[2.8L V6]]. | ||
== Overview == | == Overview == | ||
| Line 10: | Line 10: | ||
In Fiero discussions, the Isuzu 5-speed is commonly associated with economy, light shifting effort, and good highway cruising when used behind the stock 2.5L engine. | In Fiero discussions, the Isuzu 5-speed is commonly associated with economy, light shifting effort, and good highway cruising when used behind the stock 2.5L engine. | ||
Related topics: | |||
* [[Transmission]] | |||
* [[Manual transmission]] | |||
* [[Iron Duke]] | |||
* [[Transmission identification]] | |||
== Location == | == Location == | ||
{{Image wanted|Photo or diagram showing the Isuzu 5-speed transmission installed in a Pontiac Fiero, preferably showing the transmission case, shift cables, clutch slave cylinder, mounts, | {{Image wanted|Photo or diagram showing the Isuzu 5-speed transmission installed in a Pontiac Fiero, preferably showing the transmission case, shift cables, clutch slave cylinder, mounts, axle locations, and fluid check/fill area.}} | ||
The Isuzu 5-speed is mounted transversely in the rear engine compartment, bolted to the engine. | The Isuzu 5-speed is mounted transversely in the rear engine compartment, bolted to the engine. | ||
| Line 26: | Line 33: | ||
* Isuzu manual transmission | * Isuzu manual transmission | ||
* Isuzu five-speed | * Isuzu five-speed | ||
* 5-speed Isuzu | |||
* 5-speed manual | * 5-speed manual | ||
* Four-cylinder 5-speed | * Four-cylinder 5-speed | ||
In factory service information, the unit may also be identified as the '''5-speed Isuzu 76 mm manual transaxle'''. | |||
In Fiero usage, “Isuzu 5-speed” usually refers to the five-speed manual transmission used behind the 2.5L four-cylinder engine. | In Fiero usage, “Isuzu 5-speed” usually refers to the five-speed manual transmission used behind the 2.5L four-cylinder engine. | ||
| Line 46: | Line 56: | ||
* 1988 four-cylinder Fieros | * 1988 four-cylinder Fieros | ||
Related | Related model-year pages: | ||
* [[1985 Pontiac Fiero]] | * [[1985 Pontiac Fiero]] | ||
* [[1986 Pontiac Fiero]] | * [[1986 Pontiac Fiero]] | ||
* [[1987 Pontiac Fiero]] | * [[1987 Pontiac Fiero]] | ||
* [[1988 Pontiac Fiero]] | * [[1988 Pontiac Fiero]] | ||
Because many Fieros have been modified or repaired over time, the installed transmission should be identified directly rather than relying only on model year, trim, or engine. | |||
== Specifications == | == Specifications == | ||
| Line 66: | Line 74: | ||
| Transverse manual transaxle | | Transverse manual transaxle | ||
|- | |- | ||
| RPO code | | Factory service description | ||
| 5-speed Isuzu 76 mm manual transaxle | |||
|- | |||
| Common Fiero RPO code | |||
| MT2 | | MT2 | ||
|- | |||
| Other related RPO reference | |||
| MK7, where applicable in service information | |||
|- | |- | ||
| Speeds | | Speeds | ||
| Line 81: | Line 95: | ||
| 1985-1988 2.5L four-cylinder models | | 1985-1988 2.5L four-cylinder models | ||
|- | |- | ||
| Factory V6 use | | Factory V6 Fiero use | ||
| No | | No | ||
|- | |- | ||
| Line 91: | Line 105: | ||
|- | |- | ||
| Common Fiero role | | Common Fiero role | ||
| Economy-oriented five-speed manual | | Economy-oriented five-speed manual transmission | ||
|} | |} | ||
| Line 126: | Line 140: | ||
Because Fieros are often modified, repaired, or transmission-swapped, the actual installed transmission should be identified directly when exact gearing matters. | Because Fieros are often modified, repaired, or transmission-swapped, the actual installed transmission should be identified directly when exact gearing matters. | ||
Related topic: | |||
* [[Transmission gear ratios]] | |||
== General design == | |||
The Isuzu 5-speed is a transverse manual transaxle. | |||
The transaxle combines the manual transmission and differential in one unit. It is mounted behind the passenger compartment with the engine and drives the rear wheels through axle shafts. | |||
The transmission is shifted by cables from the interior shifter and uses the Fiero hydraulic clutch system for clutch release. | |||
== Operation == | == Operation == | ||
| Line 131: | Line 157: | ||
The Isuzu 5-speed is a manually shifted transaxle. | The Isuzu 5-speed is a manually shifted transaxle. | ||
The driver selects gears using the interior shifter | The driver selects gears using the interior shifter. The shifter operates the transmission through shift and select cables. | ||
The clutch is operated hydraulically using a clutch pedal, clutch master cylinder, hydraulic line, and clutch slave cylinder. | |||
The fifth gear is an overdrive gear intended to reduce cruising rpm and improve highway fuel economy. | The fifth gear is an overdrive gear intended to reduce cruising rpm and improve highway fuel economy. | ||
| Line 137: | Line 165: | ||
== Shift cables and shifter == | == Shift cables and shifter == | ||
The Isuzu 5-speed uses shift cables between the interior shifter and the transmission. | The Isuzu 5-speed uses shift and select cables between the interior shifter and the transmission. | ||
Cable condition and adjustment are important. Worn, stretched, damaged, or misadjusted cables can cause poor shifting, difficulty selecting gears, or an inability to engage certain gears. | Cable condition and adjustment are important. Worn, stretched, damaged, or misadjusted cables can cause poor shifting, difficulty selecting gears, or an inability to engage certain gears. | ||
The Isuzu cable and bracket arrangement should not be assumed to interchange with the [[Getrag 5-speed]] or [[Muncie 4-speed]] without verification. | |||
Related topics: | Related topics: | ||
| Line 145: | Line 175: | ||
* [[Shift cable]] | * [[Shift cable]] | ||
* [[Manual shifter]] | * [[Manual shifter]] | ||
* [[Transmission identification]] | |||
* [[Transmission]] | |||
== Clutch system == | == Clutch system == | ||
| Line 163: | Line 192: | ||
Clutch hydraulic problems can be mistaken for transmission problems. | Clutch hydraulic problems can be mistaken for transmission problems. | ||
A clutch that does not fully disengage can cause hard shifting or grinding even if the transmission itself is not damaged. | |||
Related topics: | Related topics: | ||
* [[Clutch]] | * [[Clutch]] | ||
* [[Clutch hydraulic system]] | |||
* [[Clutch master cylinder]] | * [[Clutch master cylinder]] | ||
* [[Clutch slave cylinder]] | * [[Clutch slave cylinder]] | ||
* [[Clutch bleeding]] | * [[Clutch bleeding]] | ||
* [[Clutch pedal]] | * [[Clutch pedal]] | ||
== Fluid service == | |||
The Isuzu 5-speed requires the correct transmission fluid. | |||
Factory service information for the Fiero Isuzu 5-speed lists the MT2 refill capacity as: | |||
{| class="wikitable" | |||
! Transmission | |||
! RPO | |||
! Manufacturer | |||
! Refill capacity | |||
|- | |||
| 5-speed manual transaxle | |||
| MT2 | |||
| Isuzu | |||
| 2.5 L / 5.3 pt | |||
|} | |||
Fluid level and condition are important for gear and bearing life. Low, contaminated, or incorrect fluid can contribute to noise, wear, and shifting problems. | |||
When servicing the transmission, verify the correct fluid specification and capacity for the model year and installed transmission. | |||
Related topics: | |||
* [[Transmission fluid]] | |||
* [[Manual transmission]] | |||
* [[Service procedures]] | |||
== Common problems == | == Common problems == | ||
| Line 186: | Line 246: | ||
* Worn mounts | * Worn mounts | ||
* Previous incorrect service | * Previous incorrect service | ||
* Confusion with other five-speed transmissions | |||
* Weakness when used behind higher-output engine swaps | * Weakness when used behind higher-output engine swaps | ||
| Line 208: | Line 269: | ||
Before assuming the transmission itself has failed, basic checks should include: | Before assuming the transmission itself has failed, basic checks should include: | ||
# Verify that the transmission is actually an Isuzu 5-speed. | |||
# Check clutch hydraulic operation. | # Check clutch hydraulic operation. | ||
# Check clutch pedal travel. | # Check clutch pedal travel. | ||
| Line 213: | Line 275: | ||
# Check for air in the clutch hydraulic system. | # Check for air in the clutch hydraulic system. | ||
# Inspect shift and select cables. | # Inspect shift and select cables. | ||
# Check cable adjustment and cable | # Check cable adjustment. | ||
# Inspect cable brackets and cable ends. | |||
# Inspect transmission and engine mounts. | # Inspect transmission and engine mounts. | ||
# Check transmission fluid level and condition. | # Check transmission fluid level and condition. | ||
| Line 219: | Line 282: | ||
# Determine whether the problem occurs in one gear, several gears, or all gears. | # Determine whether the problem occurs in one gear, several gears, or all gears. | ||
A clutch | A clutch, cable, or mount problem can cause shifting complaints that feel like internal transmission failure. | ||
== | == Relationship to the Getrag 5-speed == | ||
The Isuzu 5-speed | The Isuzu 5-speed and [[Getrag 5-speed]] are both factory Fiero five-speed manual transmissions, but they were used in different factory applications. | ||
The Isuzu 5-speed was used with the 2.5L four-cylinder engine from 1985 through 1988. | |||
The Getrag 5-speed was used with the 2.8L V6 in later V6 Fieros. | |||
Because both are five-speed manuals, the two are sometimes confused in owner discussions. Parts, cables, brackets, mounts, internal components, clutch parts, and service procedures should not be assumed to interchange without verification. | |||
== Relationship to the Muncie 4-speed == | |||
The [[Muncie 4-speed]] was used in earlier Fiero manual applications. | |||
For four-cylinder Fieros, the Isuzu 5-speed replaced the earlier four-speed manual arrangement and provided an overdrive fifth gear for lower highway rpm. | |||
Because | Because the Muncie 4-speed and Isuzu 5-speed are different transmissions, parts, cables, brackets, mounts, and service procedures should not be assumed to interchange. | ||
== Relationship to engine swaps == | == Relationship to engine swaps == | ||
| Line 256: | Line 313: | ||
* Intended driving style | * Intended driving style | ||
* Gear ratios | * Gear ratios | ||
* Highway rpm | |||
* Strength | * Strength | ||
* Clutch compatibility | * Clutch compatibility | ||
| Line 281: | Line 339: | ||
* Good match for the 2.5L engine | * Good match for the 2.5L engine | ||
* Better highway cruising than non-overdrive transmissions | * Better highway cruising than non-overdrive transmissions | ||
* Common factory pairing with the Iron Duke | |||
Limitations include: | Limitations include: | ||
| Line 289: | Line 348: | ||
* Possible shift-cable and clutch-hydraulic issues | * Possible shift-cable and clutch-hydraulic issues | ||
* Parts and interchange details must be verified carefully | * Parts and interchange details must be verified carefully | ||
* Confusion with other five-speed manual transmissions | |||
* | |||
== Identification == | == Identification == | ||
| Line 315: | Line 362: | ||
* Transmission case features | * Transmission case features | ||
* Mounting brackets | * Mounting brackets | ||
* Clutch slave cylinder and bracket arrangement | |||
* Service parts identification label, if still present | * Service parts identification label, if still present | ||
* Physical inspection of the installed transmission | * Physical inspection of the installed transmission | ||
| Line 325: | Line 373: | ||
* [[RPO codes]] | * [[RPO codes]] | ||
* [[Manual transmission]] | * [[Manual transmission]] | ||
== Service notes == | |||
When working on the Isuzu 5-speed: | |||
* Verify that the car actually has the Isuzu transmission before ordering parts. | |||
* Do not assume Getrag or Muncie 4-speed parts interchange. | |||
* Check clutch hydraulics before condemning the transmission. | |||
* Inspect shift and select cables. | |||
* Inspect cable brackets and transaxle shift levers. | |||
* Use the correct fluid. | |||
* Check fluid level using the correct procedure. | |||
* Check mounts if there is drivetrain movement or clunking. | |||
* Verify axle seal condition if fluid leaks are present. | |||
* Verify transmission code and application when exact identification matters. | |||
* Be cautious with high-power engine swaps. | |||
== Notes == | |||
The Isuzu 5-speed is the factory five-speed manual transmission most closely associated with four-cylinder Fieros. | |||
It provides an overdrive fifth gear and is generally well suited to stock 2.5L use. For V6 cars, high-output swaps, or parts replacement, the installed transmission should be identified directly because Fiero five-speed transmissions do not all share the same parts, cables, brackets, or service procedures. | |||
== See also == | == See also == | ||
| Line 331: | Line 401: | ||
* [[Manual transmission]] | * [[Manual transmission]] | ||
* [[Transmission gear ratios]] | * [[Transmission gear ratios]] | ||
* [[Transmission identification]] | |||
* [[Transmission fluid]] | |||
* [[Getrag 5-speed]] | * [[Getrag 5-speed]] | ||
* [[Muncie 4-speed]] | * [[Muncie 4-speed]] | ||
* [[TH125 automatic]] | * [[TH125 automatic]] | ||
* [[Clutch]] | * [[Clutch]] | ||
* [[Clutch hydraulic system]] | |||
* [[Shift cable]] | * [[Shift cable]] | ||
* [[Transmission | * [[Manual shifter]] | ||
* [[Transmission mounts]] | |||
* [[Engine swaps]] | * [[Engine swaps]] | ||
* [[Iron Duke]] | * [[Iron Duke]] | ||
Latest revision as of 00:05, 19 July 2026
Isuzu 5-speed refers to the five-speed manual transaxle used in four-cylinder Pontiac Fiero models.
The Isuzu 5-speed was the factory five-speed manual transmission used with the 2.5L four-cylinder Fiero. It should not be confused with the Getrag 5-speed, which was used with the 2.8L V6.
Overview
The Isuzu 5-speed is a transverse manual transaxle used in four-cylinder Fieros.
It was introduced during Fiero production as a more fuel-efficient alternative to the earlier four-speed manual transmission. Because it has an overdrive fifth gear, it allows lower engine rpm at highway speeds than the four-speed manual or the TH125 automatic.
In Fiero discussions, the Isuzu 5-speed is commonly associated with economy, light shifting effort, and good highway cruising when used behind the stock 2.5L engine.
Related topics:
Location
Image wanted: Photo or diagram showing the Isuzu 5-speed transmission installed in a Pontiac Fiero, preferably showing the transmission case, shift cables, clutch slave cylinder, mounts, axle locations, and fluid check/fill area.
The Isuzu 5-speed is mounted transversely in the rear engine compartment, bolted to the engine.
It is mounted on the engine cradle and drives the rear wheels through the Fiero axle shafts.
Naming
The transmission is commonly called:
- Isuzu 5-speed
- Isuzu manual transmission
- Isuzu five-speed
- 5-speed Isuzu
- 5-speed manual
- Four-cylinder 5-speed
In factory service information, the unit may also be identified as the 5-speed Isuzu 76 mm manual transaxle.
In Fiero usage, “Isuzu 5-speed” usually refers to the five-speed manual transmission used behind the 2.5L four-cylinder engine.
Fiero applications
The Isuzu 5-speed was used with the 2.5L four-cylinder Fiero from 1985 through 1988.
It replaced the 1984 four-cylinder Muncie 4-speed manual transmissions as the factory manual transmission for four-cylinder Fieros.
It was not the factory V6 five-speed transmission. V6 five-speed Fieros used the Getrag 5-speed.
Common factory applications include:
- 1985 four-cylinder Fieros
- 1986 four-cylinder Fieros
- 1987 four-cylinder Fieros
- 1988 four-cylinder Fieros
Related model-year pages:
Because many Fieros have been modified or repaired over time, the installed transmission should be identified directly rather than relying only on model year, trim, or engine.
Specifications
| Specification | Isuzu 5-speed |
|---|---|
| Type | Transverse manual transaxle |
| Factory service description | 5-speed Isuzu 76 mm manual transaxle |
| Common Fiero RPO code | MT2 |
| Other related RPO reference | MK7, where applicable in service information |
| Speeds | 5 forward speeds |
| Reverse | Yes |
| Overdrive | Yes |
| Factory Fiero use | 1985-1988 2.5L four-cylinder models |
| Factory V6 Fiero use | No |
| Clutch operation | Hydraulic |
| Shift operation | Cable-operated |
| Common Fiero role | Economy-oriented five-speed manual transmission |
The Isuzu 5-speed was the factory five-speed manual transmission for four-cylinder Fieros. Gear ratios, codes, and service details should still be verified against the actual installed transmission when exact information matters.
Gear ratios
The Fiero four-cylinder Isuzu 5-speed is associated with RPO code MT2.
| Gear | Ratio |
|---|---|
| 1st | 3.73 |
| 2nd | 2.04 |
| 3rd | 1.45 |
| 4th | 1.03 |
| 5th | 0.74 |
| Final drive | 3.35 |
The fifth gear is an overdrive gear and helps reduce engine rpm during highway driving.
Because Fieros are often modified, repaired, or transmission-swapped, the actual installed transmission should be identified directly when exact gearing matters.
Related topic:
General design
The Isuzu 5-speed is a transverse manual transaxle.
The transaxle combines the manual transmission and differential in one unit. It is mounted behind the passenger compartment with the engine and drives the rear wheels through axle shafts.
The transmission is shifted by cables from the interior shifter and uses the Fiero hydraulic clutch system for clutch release.
Operation
The Isuzu 5-speed is a manually shifted transaxle.
The driver selects gears using the interior shifter. The shifter operates the transmission through shift and select cables.
The clutch is operated hydraulically using a clutch pedal, clutch master cylinder, hydraulic line, and clutch slave cylinder.
The fifth gear is an overdrive gear intended to reduce cruising rpm and improve highway fuel economy.
Shift cables and shifter
The Isuzu 5-speed uses shift and select cables between the interior shifter and the transmission.
Cable condition and adjustment are important. Worn, stretched, damaged, or misadjusted cables can cause poor shifting, difficulty selecting gears, or an inability to engage certain gears.
The Isuzu cable and bracket arrangement should not be assumed to interchange with the Getrag 5-speed or Muncie 4-speed without verification.
Related topics:
Clutch system
Like other manual-transmission Fieros, the Isuzu 5-speed uses a hydraulic clutch system.
The clutch system includes:
- Clutch pedal
- Clutch master cylinder
- Hydraulic clutch line
- Clutch slave cylinder
- Release arm
- Clutch pressure plate and disc
- Throwout bearing
Clutch hydraulic problems can be mistaken for transmission problems.
A clutch that does not fully disengage can cause hard shifting or grinding even if the transmission itself is not damaged.
Related topics:
- Clutch
- Clutch hydraulic system
- Clutch master cylinder
- Clutch slave cylinder
- Clutch bleeding
- Clutch pedal
Fluid service
The Isuzu 5-speed requires the correct transmission fluid.
Factory service information for the Fiero Isuzu 5-speed lists the MT2 refill capacity as:
| Transmission | RPO | Manufacturer | Refill capacity |
|---|---|---|---|
| 5-speed manual transaxle | MT2 | Isuzu | 2.5 L / 5.3 pt |
Fluid level and condition are important for gear and bearing life. Low, contaminated, or incorrect fluid can contribute to noise, wear, and shifting problems.
When servicing the transmission, verify the correct fluid specification and capacity for the model year and installed transmission.
Related topics:
Common problems
Common Isuzu 5-speed topics include:
- Worn or misadjusted shift cables
- Clutch hydraulic problems
- Difficulty shifting into gear
- Grinding during shifts
- Worn synchronizers
- Gear noise
- Fluid leaks
- Axle seal leaks
- Worn mounts
- Previous incorrect service
- Confusion with other five-speed transmissions
- Weakness when used behind higher-output engine swaps
Symptoms
Possible symptoms of Isuzu 5-speed problems include:
- Hard shifting
- Gear clash or grinding
- Difficulty selecting reverse
- Difficulty selecting first gear
- Transmission pops out of gear
- Clutch does not fully disengage
- Noise while driving
- Noise that changes with gear selection
- Fluid leak
- Excessive drivetrain movement
- Shifter feels loose or vague
Diagnosis
Before assuming the transmission itself has failed, basic checks should include:
- Verify that the transmission is actually an Isuzu 5-speed.
- Check clutch hydraulic operation.
- Check clutch pedal travel.
- Inspect the clutch master cylinder and slave cylinder.
- Check for air in the clutch hydraulic system.
- Inspect shift and select cables.
- Check cable adjustment.
- Inspect cable brackets and cable ends.
- Inspect transmission and engine mounts.
- Check transmission fluid level and condition.
- Inspect axle seals and related leak points.
- Determine whether the problem occurs in one gear, several gears, or all gears.
A clutch, cable, or mount problem can cause shifting complaints that feel like internal transmission failure.
Relationship to the Getrag 5-speed
The Isuzu 5-speed and Getrag 5-speed are both factory Fiero five-speed manual transmissions, but they were used in different factory applications.
The Isuzu 5-speed was used with the 2.5L four-cylinder engine from 1985 through 1988.
The Getrag 5-speed was used with the 2.8L V6 in later V6 Fieros.
Because both are five-speed manuals, the two are sometimes confused in owner discussions. Parts, cables, brackets, mounts, internal components, clutch parts, and service procedures should not be assumed to interchange without verification.
Relationship to the Muncie 4-speed
The Muncie 4-speed was used in earlier Fiero manual applications.
For four-cylinder Fieros, the Isuzu 5-speed replaced the earlier four-speed manual arrangement and provided an overdrive fifth gear for lower highway rpm.
Because the Muncie 4-speed and Isuzu 5-speed are different transmissions, parts, cables, brackets, mounts, and service procedures should not be assumed to interchange.
Relationship to engine swaps
The Isuzu 5-speed is sometimes used in engine-swap cars because of availability, gearing, or because it is already installed in the car.
However, it was not the factory V6 performance transmission and is generally not considered the strongest Fiero manual transmission choice for high-output swaps.
For engine swaps, transmission choice depends on:
- Engine torque
- Intended driving style
- Gear ratios
- Highway rpm
- Strength
- Clutch compatibility
- Mounts
- Shift cables
- Axles
- Parts availability
Related topics:
Strength and limitations
The Isuzu 5-speed is generally suitable for stock four-cylinder Fiero use when in good condition.
Its advantages include:
- Five forward gears
- Overdrive for highway driving
- Light shifting feel
- Good match for the 2.5L engine
- Better highway cruising than non-overdrive transmissions
- Common factory pairing with the Iron Duke
Limitations include:
- Not the factory V6 five-speed
- Not usually preferred for high-torque engine swaps
- Age-related wear in surviving units
- Possible shift-cable and clutch-hydraulic issues
- Parts and interchange details must be verified carefully
- Confusion with other five-speed manual transmissions
Identification
The Isuzu 5-speed can be identified by transmission case features, shift cable arrangement, model year, engine application, RPO code, and related mounting hardware.
Useful identification checks include:
- RPO code MT2
- Four-cylinder factory application
- Five-speed shift pattern
- Isuzu-specific shift cable arrangement
- Transmission case features
- Mounting brackets
- Clutch slave cylinder and bracket arrangement
- Service parts identification label, if still present
- Physical inspection of the installed transmission
Because many Fieros have been modified, repaired, or swapped over time, identification should be based on the actual installed transmission rather than the car's year or trim alone.
Related topics:
Service notes
When working on the Isuzu 5-speed:
- Verify that the car actually has the Isuzu transmission before ordering parts.
- Do not assume Getrag or Muncie 4-speed parts interchange.
- Check clutch hydraulics before condemning the transmission.
- Inspect shift and select cables.
- Inspect cable brackets and transaxle shift levers.
- Use the correct fluid.
- Check fluid level using the correct procedure.
- Check mounts if there is drivetrain movement or clunking.
- Verify axle seal condition if fluid leaks are present.
- Verify transmission code and application when exact identification matters.
- Be cautious with high-power engine swaps.
Notes
The Isuzu 5-speed is the factory five-speed manual transmission most closely associated with four-cylinder Fieros.
It provides an overdrive fifth gear and is generally well suited to stock 2.5L use. For V6 cars, high-output swaps, or parts replacement, the installed transmission should be identified directly because Fiero five-speed transmissions do not all share the same parts, cables, brackets, or service procedures.