View source for Code 44

'''Code 44''' is a [[Diagnostic trouble codes|diagnostic trouble code]] related to a lean exhaust indication on the [[Pontiac Fiero]].

Code 44 indicates that the [[ECM]] is seeing an oxygen sensor signal that suggests the engine is running lean.

== Overview ==

The [[Oxygen sensor]] monitors oxygen content in the exhaust. The ECM uses this signal to adjust fuel mixture during closed-loop operation.

Code 44 is set when the ECM detects a lean exhaust condition for longer than expected. A lean indication can be caused by too much air, too little fuel, an exhaust leak, a sensor problem, or an electrical issue.

== Flash pattern ==

Code 44 is displayed as:

* Four flashes
* Pause
* Four flashes

This represents code '''44'''.

'''Animated flash pattern:'''

[[File:Code44.gif|none]]

== Meaning ==

Code 44 usually indicates that the ECM sees the exhaust mixture as too lean.

Possible causes include:

* Vacuum leak
* Low fuel pressure
* Weak fuel pump
* Restricted fuel filter
* Dirty or restricted injectors
* Exhaust leak before or near the oxygen sensor
* Faulty oxygen sensor
* Oxygen sensor wiring problem
* Poor ground or connector problem
* MAP sensor problem
* ECM input problem

== Symptoms ==

Possible symptoms may include:

* Check engine light
* Hesitation
* Poor acceleration
* Surging
* Rough idle
* Stalling
* Higher engine temperature
* Spark knock or pinging
* Poor drivability
* Little or no obvious drivability problem

== Diagnosis ==

Basic diagnostic checks include:

# Confirm that Code 44 is present.
# Check for [[Vacuum leaks]].
# Inspect the oxygen sensor wiring and connector.
# Check for exhaust leaks near the oxygen sensor.
# Check fuel pressure.
# Inspect or replace the fuel filter if restricted.
# Check fuel pump operation.
# Check for injector problems.
# Check for other stored trouble codes.
# Check MAP sensor vacuum and wiring.
# Check grounds and ECM connections.

== Vacuum leaks ==

A vacuum leak can allow extra unmetered air into the engine, causing a lean condition.

Related topics:

* [[Vacuum leaks]]
* [[EGR tube]]
* [[MAP sensor]]
* [[Throttle body]]
* [[Intake manifold]]

== Fuel delivery ==

Low fuel pressure or restricted fuel delivery can cause the engine to run lean.

Related topics:

* [[Fuel pressure test]]
* [[Fuel pump problems]]
* [[Fuel filter replacement]]
* [[Fuel injectors]]
* [[Fuel pressure regulator]]

== Oxygen sensor and exhaust leaks ==

An oxygen sensor problem or exhaust leak near the sensor can cause the ECM to see a false lean condition.

Related topics:

* [[Oxygen sensor]]
* [[Exhaust leaks]]
* [[Code 13]]

== Related codes ==

Related fuel-control and oxygen-sensor codes include:

* [[Code 13]] - Oxygen sensor circuit
* [[Code 45]] - Rich exhaust indication

== Notes ==

Code 44 should not automatically be treated as a failed oxygen sensor. Vacuum leaks, fuel pressure problems, exhaust leaks, wiring faults, and sensor issues can all cause a lean indication.

Diagnosis should determine whether the engine is actually running lean or whether the ECM is receiving a misleading signal.

== See also ==

* [[Diagnostic trouble codes]]
* [[ALDL diagnostics]]
* [[Oxygen sensor]]
* [[Vacuum leaks]]
* [[Fuel pressure test]]
* [[Fuel system]]
* [[ECM]]
* [[Code 13]]
* [[Code 45]]

[[Category:Fieropedia]]
[[Category:Diagnostics]]
[[Category:Electrical system]]
[[Category:Engine]]
[[Category:Fuel system]]